SCT 370 Pre-Spot Vacuum Cleaners

Ref: 105

Quantity:

Designed for Pre-Spot cleaning of carpets and furniture.
Can accept hose diameters form 51mm to 32mm.
Design enables user to vacuum spills/spillages and carry out wet extraction from carpets or upholstery.
9Litre wet capacity.

230 Volt Only
15 litre dry capacity.

SUITABLE USES
Can be used for PreSpot cleaning Is capable of disinfecting dampening down as you vacuum
Filtration level down to .5 micron(filter required optional extra)
Supplied with accessory kit A14

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This machine MUST NOT be filled with hot water when PreSpot cleaning.

MOTOR 1000 WATTS
SUCTION 240MB
AIRFLOW 42 LITRES SEC
WEIGHT 11 KG
CLEANING RANGE 31.8M
FILTRATION 0.5 MICRON RETAINING 97%
CAPACITY 9 LITRES

WV 470 S/C Swarf and Coolant Vacuum

Ref: 102

Price: £355.61 (Including VAT at 20% )

Quantity:

Designed for vacuum cleaning coolants and swarf from the sumps of lathes and milling machines.
Fitted with a cyclonic side entry, which can accept hose diameters from 51mm down to 32mm.
Fitted with a dump hose for easy emptying of coolants.
20 litre capacity.
Unique folding handle.
Easy emptying of swarf using tipper handle fitted to machine.

SUITABLE USES
Can be used to vacuum swarf Chipping's and coolants
Capable of cleaning water spillages.
Ideal for cleaning out the sumps of machines found in engineering workshops.

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This range of machines cannot be used for dry pick up

MOTOR 1100 WATTS
SUCTION 210MB
AIRFLOW 45 LITRES SEC
WEIGHT 10 Kgs
CLEANING RANGE: 23.2 M
SIZE: 358x450x700mm
CAPACITY: 20 LITRES

230 Volts Only

People who bought this also bought:

NQS250B-22 Commercial Dry Vacuum £181.00 find out more

3.9m Nuflex Threaded Hose £22.00 find out more

WV570sc Swarf and Coolant Vac

Ref: 52

Price: £587.90 (Including VAT at 20% )

Quantity:

The WV 570 Swarf / coolant spec, has been designed exclusively for picking up Swarf
chippings and mineral based coolants.
The machine is intended for use in the metal workshop and comes complete with a crevice tool and gulper tool.
The machine is fitted with a cyclonic side entry to assist filtration and to keep oil mist to aminimum.
The machine has a capacity of 15 litres of Swarf / coolant.
The machine comes with a two-year warranty unless the machine is being used for the
removal of hydraulic fluid in which case the warranty is limited to one year.

SUITABLE USES
The WV 570 Swarf / Coolant vac is able to pick up most types of particulate Swarf / coolant.
The machine can also be used as a standard wet pick up machine.
The machine can be used as a dry vac when fitted with a NVM 16 Permatex filter and NVM 3B bag (not supplied with machine).

LIMITATIONS
This machine is not intended for picking up long lengths of Swarf (bird nests).
It can not be used for picking up hazardous or volatile substances.
The machine can only be used for dry pick up if the filter and bag are used (these do not come standard with the machine).

MOTOR: 1000 Watts
SUCTION: 2300mm
WEIGHT: 13.5Kg
AIRFLOW: 40 Litres per sec
FILTRATION: 0.5 of a micron retaining 97%
CLEANING RANGE: 23.2m
SIZE: 415 x 415 x 615mm

WVD 570-2sc Swarf and Coolant Vac - Twin Motors

Ref: 90

Price: £742.09 (Including VAT at 20% )

Quantity:

Voltage Voltage required 230 Volts110 Volts

The WVD 570-2 Swarf / coolant spec, has been designed exclusively for picking up Swarf
chippings and mineral based coolants.
The machine is intended for use in the metal workshop and comes complete with a crevice tool and gulper tool.
The machine is fitted with a cyclonic side entry to assist filtration and to keep oil mist to aminimum.
The machine has a capacity of 15 litres of Swarf / coolant.
The machine comes with a two-year warranty unless the machine is being used for the
removal of hydraulic fluid in which case the warranty is limited to one year.

SUITABLE USES
The WVD 570-2 Swarf / Coolant vac is able to pick up most types of particulate Swarf / coolant.
The machine can also be used as a standard wet pick up machine.
The machine can be used as a dry vac when fitted with a NVM 16 Permatex filter and NVM 3B bag (not supplied with machine).

LIMITATIONS
This machine is not intended for picking up long lengths of Swarf (bird nests).
It can not be used for picking up hazardous or volatile substances.
The machine can only be used for dry pick up if the filter and bag are used (these do not come standard with the machine).

MOTOR: 2000 Watts
SUCTION: 2300mm
WEIGHT: 15.5Kg
AIRFLOW: 80 Litres per sec
FILTRATION: 0.5 of a micron retaining 97%
CLEANING RANGE: 31.8m
SIZE: 415 x 415 x 630mm

WVD 900-2s Oil Spec - Twin Motors

Ref: 54

Price: £865.32 (Including VAT at 20% )

Quantity:

Voltage Voltage required 230 Volts110 Volts

An adaptation of a WVD 902.
A Cyclonic exit is fitted to the head assembly to enable a hose to be connected if needed, to limit the amount of synthetic oil mist escaping into the atmosphere.
Comes complete with a metal cage float assembly.
A secondary filter is fitted to prevent oil mist entering the head of the machine.
Attached to the drum assembly is a Cyclonic entrance, we use these to lessen the chance of oil mist as the contaminant enters the drum.
A drain hose is fitted to this machine for easy disposal of the contaminant.

SUITABLE USES
This machine can be usedfor most wet applications.The W VD 900-2 can also be used for dry pick up when used with an optional filter NVM 16(not supplied)

LIMITATIONS
This machine is not suitable for picking up hazardous or volatile/toxic waste If the machine is used to pick up hydraulic fluid the warranty is limited to one year

MOTOR: 2000 Watts
SUCTION: 2300mm
WEIGHT: 22Kgs
AIRFLOW: 82 Litres per sec
CLEANING RANGE: 31.8m
SIZE: 720 x 490 x 880mm
FILTRATION: 0.5 of a micron retaining 97%
CAPACITY: 30 Litres wet 40 Litres dry

SSIVD 1800-2 DH Swarf/Coolant Vacuum

Ref: 96

Price: £1,282.33 (Including VAT at 20% )

Quantity:

Designed for use cleaning out sumps on engineering machinery.
Fitted with a cyclonic side entry, which can accept hose diameters from 76mm down to 32mm.
Design enables the user to pick up swarf and coolant which can be separated to re-cycle oil.
A stainless steel strainer is fitted inside the machine which separates swarf particles down to 1.5mm from the coolant.
The machine has a maximum capacity of 70 litres

SUITABLE USES.
Can be used to vacuum from sumps and drains in an engineering workshop.
Ideal for wet pick up.
Main use is for the removal and separation of swarf and mineral based coolants.

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This range of machines cannot be used for dry pick up.

MOTOR: 2000 Watts
SUCTION: 2400mm
WEIGHT: 30.5kg
AIRFLOW: 80 litres per second
CLEANING RANGE: 31.8m (1 05ft)
CAPACITY: 70ltrs

230 Volt Only

SSIVD 1800-2 PH Swarf/Coolant Vacuum

Ref: 88

Price: £1,441.57 (Including VAT at 20% )

Quantity:

Voltage Voltage required 230 Volts110 Volts

Designed for use cleaning out sumps on engineering machinery.
Fitted with a cyclonic side entry, which can accept hose diameters from 76mm down to 32mm.
Design enables the user to pick up swarf and coolant which can be separated to re-cycle oil.
A stainless steel strainer is fitted inside the machine which separates swarf particles down to 1.5mm
from the coolant.
The machine has a maximum capacity of 70 litres as well as a 50 watt exhaust pump which can pump up to 60 litres per minute.

SUITABLE USES.
Can be used to vacuum from sumps and drains in an engineering workshop.
Ideal for wet pick up.
Main use is for the removal and separation of swarf and mineral based coolants.

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This range of machines cannot be used for dry pick up.

MOTOR: 2000 Watts
SUCTION: 2400mm
WEIGHT: 30.5kg
AIRFLOW: 80 litres per second
CLEANING RANGE: 31.8m (105ft)
CAPACITY: 70 ltrs

SSIVD 1800-2 AP Swarf/Coolant Vacuum

Ref: 72

Price: £2,112.36 (Including VAT at 20% )

Quantity:

Designed for use cleaning out sumps on engineering machinery.
Fitted with a cyclonic side entry, which can accept hose diameters from 76mm down to 32mm.
Design enables the user to pick up swarf and coolant which can be separated to re-cycle oil.
A stainless steel strainer is fitted inside the machine which separates swarf particles from the coolant.
The machine has a maximum capacity of 70 litres, Which is easily removed using the automatic pump fitted inside the machine; this can be pumped from the machine in less than 2 minutes.

SUITABLE USES.
Can be used to vacuum from sumps and drains in an engineering workshop.
Ideal for wet pick up.
Main use is for the removal and separation of swarf and mineral based coolants.

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This range of machines cannot be used for dry pick up.

MOTOR: 2000 Watts
SUCTION: 2400mm
WEIGHT: 30.5kg
AIRFLOW: 80 litres per second
CLEANING RANGE: 31.8m (105ft)
CAPACITY: 70 ltrs

NTD 2003-2 Wet/Dry Spec

Ref: 60

Price: £1,247.86 (Including VAT at 20% )

Quantity:

Voltage Voltage required 230 Volts110 Volts

Designed exclusively for picking up large amounts of wet materials. A capability to hold up to 60 litres of liquid.
Fitted with stainless steel drum complete with a 32mm dump hose for ease of emptying liquid.
76mm cyclonic entry fitted with a 51 mm reducer.
Metal cage float assembly.
NVM 13 secondary filter fitted above the float assembly.

SUITABLE USES
This machine can be used to pick up most types of liquid.
It may also be used to pick up dry matter when used in conjunction with dry filters.

LIMITATIONS
This machine cannot be used to pick up hazardous or volatile substances.
It is also recommended the machine not to be used to pick up Swarf/coolant, as this is too heavy and difficult to empty.

MOTOR: 2000 Watts
SUCTION: 2200mm
WEIGHT: 46kgs
AIRFLOW: 80 Litres per sec
FILTRATION: 0.5 of a micron retaining 97%
CLEANING RANGE: 34.8m
CAPACITY 60 LITRES

SBWD 1000-2 Balanced Vacuum

Ref: 56

Quantity:

Voltage Voltage required 230 Volts110 Volts

Designed for vacuum cleaning waste straight into a refuse sack.
Fitted with a cyclonic side entry, which can accept hose diameters from 76mm down to 32mm.
Design enables the user to dampen down/disinfect waste being picked up.
Massive 50 litre capacity

SUITABLE USES
Can be used to vacuum paper mulch direct into a polythene bag.
Is capable of disinfecting/dampening down as you vacuum
Filtration level down to 0.5 micron
Supplied as a machine only so you can choose your own tailor made kit

LIMITATIONS
This machine is not suitable for the removal of hazardous or volatile substances.
This range of machines cannot be used to clean up water spills/liquid waste

MOTOR : 2000 WATTS
SUCTION : 240MB
AIRFLOW: 80 LITRES SEC
WEIGHT: 37 KG
CLEANING RANGE: 31.8M
SIZE : 1115x670x540
FILTRATION: 0.5 MICRON RETAINING 97%
CAPACITY : 50 LITRES